GS2962-IBe3

Réf. :

GS2962-IBe3

Marque :

Emetteur SDI 3 Go/s, HD, SD complet avec traitement video SMPTe

Voir la description complète

The GS2962 is an SDI transmitter, generating a SMPTe 424M, SMPTe 292M, SMPTe 259M-C or DVB-ASI compliant serial digital output signal.

The integrated ClockCleaner™ allows the device to accept parallel clocks with high input jitter, and still provide a SMPTe compliant serial digital output.

The device can operate in four basic user selectable modes: SMPTe mode, DVB-ASI mode, Data-Through mode, or Standby mode.

In SMPTe mode, the GS2962 performs all SMPTe processing features. Both SMPTe 425M Level A and Level B formats are supported with optional conversion from Level A to Level B for 1080p 50/60 4:2:2 10-bit.

In DVB-ASI mode, the device will perform 8b/10b encoding prior to transmission.

In Data-Through mode, all SMPTe and DVB-ASI processing is disabled. The device can be used as a simple parallel to serial converter.

The device can also operate in a lower power Standby mode. In this mode, no signal is generated at the output.

The GS2962 includes a fully SMPTe-compliant cable driver for SMPTe 259M-C, SMPTe 292M and SMPTe 424M interfaces. It features automatic dual slew-rate selection, depending on 3G-, HD- or SD-SDI operational requirements.

Features

Integrated low noise VCO and integrated ClockCleaner^TM
SMPTe video processing including TRS calculation and insertion, line number calculation and insertion, line based CRC calculation and insertion, illegal code re-mapping, SMPTe 352M payload identifier generation and insertion
Integrated cable driver
Supports SMPTe 425M (Level A and Level B), SMPTe 424M, SMPTe 292M, SMPTe 259M-C and DVB-ASI
Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
Ancillary data insertion
Optional conversion from SMPTe 425M Level A to Level B for 1080p 50/60 4:2:2 10-bit
Parallel data bus selectable as either 20-bit or 10-bit
GSPI Host Interface
1.2V digital core power supply, 1.2V and 3.3V analog power supplies, and selectable 1.8V or 3.3V I/O power supply
-20°C to +85°C operating temperature range
Low power operation (370 mW typical, including cable driver)
Small 11mm x 11mm 100-ball BGA package
Pb-free and ROHS compliant